Grinding: Preparing the Surface
Grinding removes burrs, scratches and oxide layers from the part. Since the coating is a thin layer, these defects would still be visible after plating, so the surface is corrected before it goes into the bath.
Polishing: The Foundation of the Shine
Polishing is done with felt wheels and compound. This step lays the foundation for the final finish: a mirror-bright nickel or chrome surface can only be achieved on a well-polished base.
Degreasing and Pickling
After grinding and polishing, parts are degreased and pickled, then plated in the nickel bath and, where required, in the chrome bath.
Preparation and Plating Under One Roof
At Serbest Nikelaj, grinding, polishing and electroplating are carried out in the same facility. Each part is managed from intake to dispatch by one team, so nothing is lost between preparation and plating, and lead times and quality stay fully under control.
Sample Runs
When you want to be sure how the surface will look after plating, a sample run can be arranged, so you can see the result before series production begins.