What Is Chrome Plating?
Decorative chrome plating is a thin top coat electroplated over a bright nickel layer. It gives the surface its bluish, bright color and resists scratching, wear and tarnishing.
Decorative chrome is not applied on its own. The nickel layer underneath provides corrosion protection, while chrome adds scratch resistance and its distinctive color on top.
Which Materials and Parts Can Be Plated?
Steel, iron, brass, copper and zamak parts can be plated. Aluminum and stainless steel require pre-treatment, so for these materials we begin with a sample run.
The parts we chrome-plate include tailpipes, elbows and sleeves; motorcycle exhausts, tanks and headlight rims; hubcaps, trim strips and emblems; and furniture, lighting and home appliance components. We also work on motorcycle restoration projects. Parts up to 1.1 m in length can be plated at our facility.
The Chrome Plating Process
Parts to be chrome-plated go through the same preparation steps as nickel plating and finish in the chrome bath:
Receiving and inspection: Incoming parts are recorded by quantity, material and surface condition.
Grinding: Burrs, scratches and oxide layers are removed to prepare the surface for plating.
Polishing: Buffing with felt wheels and compound lays the foundation for the final finish.
Nickel and chrome baths: After degreasing and pickling, parts are plated first in the nickel bath and then in the chrome bath.
Quality control and dispatch: Every batch is visually inspected, packed in protective packaging and dispatched.
Since every step takes place in the same facility, parts are not shipped elsewhere between operations.
Decorative Chrome and Bright Nickel
Bright nickel creates a mirror-like surface. Decorative chrome is applied over it to add a bluish, bright color and scratch resistance. In both cases, corrosion protection comes from the nickel layer.
Depending on where the part is used and the desired appearance, either bright nickel alone or chrome over nickel can be applied. A sample run lets you see the result before series production begins.
Coating Thickness
The decorative chrome coat is applied at 0.3–1 µm, over a nickel layer of 5–25 µm. Because the chrome coat is thin, grinding, polishing and the nickel layer play a large part in the final appearance. The right thickness is agreed at the quotation stage, based on where the part is used.
Lead Times and Delivery
The average lead time for standard batches is 48 hours. For high-volume series work, the lead time is set according to the production schedule. With a capacity of 600 parts per day, series work is carried out to plan.
Parts can be delivered to our workshop or sent by courier or freight. For series work within Bursa, pick-up from your premises can be arranged. The minimum quantity depends on the part type; samples and small batches are also accepted.
Why Serbest Nikelaj?
Serbest Nikelaj is a family-owned company that has been serving manufacturers in Yıldırım, Bursa, since 1987. Grinding, polishing and electroplating are carried out under one roof in our own baths, and we manage every part from intake to dispatch, which gives us full control over lead times and quality.
Because nickel and chrome plating are done in the same workshop, every step from surface preparation to the final coat is part of a single plan.
Requesting a Quote
You can share a photo of your part, its material and the quantity through the quote form, by phone or via WhatsApp, and we will recommend a suitable finish and prepare a quote. Answers about minimum quantities, materials, lead times and delivery are available in the Frequently Asked Questions section on our home page.
